Request a quote
Sleep sacks · 0.5 to 3.5 TOG

Baby sleep sack supplier for private label and wholesale orders

A baby sleep sack is a sleeveless or long-sleeve wearable blanket worn for sleep instead of a loose blanket. We supply sleep sacks in cotton, jersey, muslin and viscose from bamboo, with TOG, closure and sizing confirmed per style rather than quoted as a range. Orders are either wholesale baby sleep sacks for distributors or private label sleep sacks under the buyer’s own brand — both are quoted per style, never from stock.

Naming first. The same product is a baby sleep sack or wearable blanket in the United States and a baby sleeping bag in the United Kingdom. Footed versions are sold as sleep sack with feet or sleeping bag with legs. We use the vocabulary of the market you sell into, in the quote, the care label and the packaging copy.

From the range

What the styles look like

Pieces from the current range, photographed as examples. Prints, colourways and packaging shown are samples of what we run — your own artwork is applied at the sampling stage.

Starfish construction: winged arms-up sleep sack
Starfish construction: winged arms-up sleep sack
Sleeveless vest sleep sack, toddler size
Sleeveless vest sleep sack, toddler size
Quilted winter-weight sleep sack
Quilted winter-weight sleep sack
Constructions

Six constructions we quote against

Structure drives pattern, cost and test scope. Pick the construction before the fabric, not after.

ConstructionWhat it is for
SleevelessStandard cot sleep sack. No arm covering, so it layers over sleepwear.
Long sleeveFor colder rooms or unheated bedrooms. Sleeve length is a spec point, not an assumption.
Detachable sleeveOne body, two warmth levels. Zip-off sleeves must pass an attachment test.
Two-way zipNappy change without removing the garment. Zip guard at the neck is a spec point.
With feet / with legsFor toddlers who walk. Not the same pattern as a footless sack, and priced differently.
TransitionalSlimmer fit for the stage after swaddling. Fit and arm access must be stated, not implied.

TOG ratings

TOG is a measure of thermal resistance. It is a property of the finished garment, so it cannot be inferred from the fibre alone: a cotton muslin shell and a padded cotton shell are both cotton and are not the same TOG. We state the TOG of the style you order and the basis for it.

RatingTypical useConstruction note
0.5 TOGWarm rooms, summer, layered over a bodysuitLightest construction; often single-layer jersey or muslin.
1.0 TOGSpring and autumn, most heated homesThe most quoted mid-weight; confirm the actual test for the shell.
2.5 TOGWinter, unheated rooms, night-timeRequires a padded or multi-layer shell; weight and loft matter.
3.5 TOGCold rooms onlyHeaviest build; overheating risk rises, so guidance wording matters.

Fabrics and what to watch

FabricWhy buyers choose itWhat usually goes wrong
Cotton jerseyStretch, soft hand-feel, good for fitted stylesPilling and shrinkage after wash are the usual failure points.
Cotton muslin / double gauzeBreathable, textured, popular for summerOpen weave needs a stable edge finish.
Organic cottonSame construction, different fibre chainOnly claim organic with a transaction certificate covering the batch.
Viscose from bambooFluid drape, cool touchLabel as viscose from bamboo, not “bamboo”: fibre naming is regulated in the US.
Modal / lyocellSmooth, low shrinkageConfirm blend percentage, not just the fibre name.
Fleece / sherpa-facedLoft and warmth without weightFace fibre and backing are separate spec points.

Three of these get asked about by name often enough to need more than a table row. They are set out in full below: cotton structures, viscose from bamboo, and what actually produces a 2.5 TOG rating.

Two of those names need evidence before they reach a purchase order. An organic cotton sleep sack is only organic if the fibre chain carries a transaction certificate for that batch; without it the word is a labelling risk, not a selling point. A bamboo sleep sack is a viscose sleep sack: in the United States it has to be described by its fibre name, so the label reads viscose from bamboo, not simply bamboo. We quote both, and we label what the fibre actually is.

Size set

Sizes are quoted as height ranges with a measurement chart. A month label alone is not a fit specification.

SizeHeightFit risk
Newbornup to 56 cmNappy-change access matters more than length.
0–6 months56–68 cmNeck opening and armhole are the fit risks.
6–12 months68–80 cmMost common first order size band.
12–18 months80–86 cmSleeveless styles start to gap at the shoulder.
18–24 months86–92 cmFooted versions become relevant.
2–3 years92–98 cmToe room and zip length are the constraints.
Specification 1 of 3

Cotton sleep sacks

Cotton is the default shell for a sleep sack, but “cotton” is not a specification. Jersey, muslin and waffle are all cotton and behave differently in stretch, warmth and wash.

Three cotton structures, three different products

StructureWhat it gives youWhere it fails
Single jerseyStretch and a soft hand-feel; the cheapest way to a fitted sackPilling and lengthwise shrinkage after repeated washing
InterlockTwo-sided, more dimensional stability than jerseyHigher fabric cost; hand-feel is firmer
Muslin / double gauzeOpen weave, breathable, textured; the summer storyEdge fraying; the seam is the first thing to go
WaffleVisual loft without weight; reads as warmer at retailSnagging, and loft that collapses unevenly after wash

Gram weight (gsm) sits on top of all four. Two jersey sacks at 160 gsm and 220 gsm are the same structure and a different product, in warmth, drape and price. We quote gsm with a tolerance band, because a fabric delivered 8% light is a different garment.

  • Ask for the wash test, not the shrink claim. Cotton shrinks; the only useful number is the one measured on that fabric after the wash cycle you will print on the care label.
  • Organic is a fibre chain, not a construction. An organic cotton jersey sack is made exactly like a conventional one. The claim needs a transaction certificate covering the batch, not a logo on the packaging.
  • Print changes the hand. A large placement print on jersey stiffens the panel it covers. If the print is the product, sample the print, not the greige fabric.

Quote this specification →

Specification 2 of 3

Bamboo viscose sleep sacks

Viscose from bamboo is a fibre, not a finish. It drapes more than cotton and takes dye differently, and in the US it has to be labelled by its fibre name rather than as “bamboo”.

Cotton and viscose from bamboo, side by side

PropertyCottonViscose from bamboo
DrapeHolds shape; reads as structuredFluid; hugs the body
TouchDry, familiarCool and smooth against skin
Wet strengthStronger when wetWeaker when wet; handle with care in wash and in the sewing room
PillingModerate, depends on the knitHigher risk on lightweight knits
DyeTakes dye evenly, predictableDeep shades are achievable but shade control across lots needs agreeing up front
Cost positionBaselineAbove cotton at the same gsm

The labelling point that matters most. In the United States, a garment made from bamboo-derived viscose must be described by its fibre name — viscose from bamboo or rayon from bamboo — not simply as “bamboo”. We label to the rule. We also do not put antibacterial, hypoallergenic or “natural” claims on a viscose garment, because the fibre has been through a chemical process and the claim would not survive a challenge.

Where it earns its price: a brand whose position is softness and temperature comfort, selling at a premium, where the hand-feel is the reason someone picks the product up. Where it does not: a value range competing on price per unit, or a print-led range where the artwork is doing the selling.

Quote this specification →

Specification 3 of 3

2.5 TOG sleep sacks

2.5 TOG is the winter weight most buyers ask for by number. The number is a property of the finished garment, so it depends on fill weight and loft, not on the fibre name.

What actually produces 2.5 TOG

Three variables move the number: the fill (its weight and its loft), the number of layers, and the shell. A single-layer jersey sack cannot reach 2.5 TOG by being made of heavier jersey; the warmth comes from trapped air, which means fill or a multi-layer build.

BuildHow it gets thereWhat goes wrong
Quilted, filledStitched channels holding a wadding layerCold spots along the stitch lines; fill migration if channels are too wide
Padded, baggedLoose fill between shell and liningFill settles to the bottom after washing unless it is anchored
Multi-layer knitTwo or three knitted layers joined at the edgesAir pockets collapse after wash if the layers are not tacked

This is why a TOG claim has to travel with the build. If you change the fill weight, the channel width or the shell, you have changed the product, and the number on the packaging has to be re-established rather than carried over.

  • 2.5 TOG is a winter garment. The guidance printed with it should name a room-temperature band and the layers worn underneath, and the three have to agree. A 2.5 TOG sack sold with “wear over a sleepsuit” and a 24 °C recommendation is internally inconsistent.
  • Warmer is not safer. Overheating is the risk this category is regulated around, which is why we do not describe a higher TOG as better, and why we do not offer weighted versions at all.
  • Armholes and no hood. A heavy winter sack is exactly the product where a hood gets added for looks. The UK OPSS alert of October 2026 covers that combination.

Quote this specification →

Safety and labelling

Three things that are not negotiable

  • No hood, and armholes are required. The UK OPSS safety alert of October 2026 concerns sleeping bags with a hood or without armholes, citing overheating and suffocation risk. Sleep sacks for unsupervised cot sleep should follow that guidance.
  • Stop swaddling at the first sign of rolling. This is standard paediatric advice and belongs in the care instructions, not only in the marketing copy.
  • Attachment security. Zip pullers, poppers and trims are checked as small parts. A recall for a detachable zip puller is a batch-level event, which is why we keep batch traceability on every run.

How we control and document this →

Specification sheet

What is specified on the order, and what varies

Every line below appears on the specification you receive with the quote. The third column is the honest part: what changes from style to style, so you know which points to fix and which to leave open.

ItemWhat we specifyWhere it varies
Shell fibreCotton jersey, interlock, muslin / double gauze, viscose from bamboo, or a stated blendPer style; the blend is stated as a percentage, not as a fibre name
Fabric weightQuoted in gsm with a tolerance bandPer fabric; two jersey shells at different gsm are different products
TOG0.5, 1.0, 2.5 or 3.5, stated against the buildPer style, never as a range across a collection
Fill and loftNone, or a stated wadding weight between shell and liningOnly on 2.5 TOG and above; fill weight is quoted, not implied
ClosureSingle zip, two-way zip, shoulder poppers or side openingPer style; a two-way zip needs a different pattern, not a longer zip
Zip guardChin guard and a non-detachable pullerEvery style; a detachable puller is a small-parts hazard
Sleeve and footSleeveless, long sleeve, detachable sleeve; footless, footed or with legsPer style; footed patterns are graded separately
Armhole and hoodArmholes required, no hoodEvery style for unsupervised cot sleep — not an option
Size bandHeight-based, 56 cm to 98 cm, quoted as points of measurePer size set; a month label alone is not a specification
LabelsWoven main label, printed care and composition label, size flagPer artwork; wording checked against the destination market

If your own tech pack uses different points of measure, send it. We work from your document and note where it differs from ours, rather than silently translating it.

Customisation

What can carry your brand

Private label, custom print and custom development are three different jobs with three different minimums. The third column says which one you are actually buying into.

ElementWhat we can doWhat drives the minimum
PrintDigital or rotary, all-over or placement, with an agreed colour standardPrint minimum per fabric and per colourway
ColourStock shade, or dyed to a colour standard you supplyDye lot minimum
LabelsWoven main label, printed care and composition label, size flagLabel run, usually the smallest driver
PackagingPolybag, header card, belly band, printed boxPackaging print run
PatternSleeve, closure, foot, quilt pattern and size setPattern development and sampling

How the private label process runs →

Order terms

How the minimum is calculated

We do not publish one headline minimum, because a single number is always the easiest combination rather than yours. These are the rules the number comes from.

QuestionHow it works
How the minimum is calculatedThe order minimum is the largest of four: the fabric run, the print or dye lot, the style minimum per size and colour, and the packaging print run. We give all four separately, so you can see which one is binding before you commit.
How colours and sizes combineA minimum applies per style-and-colour combination, not to the order as a whole. Four sizes in three colourways is twelve combinations, and the arithmetic is units divided by twelve.
Mixing within one orderStyles sharing a shell fabric and a print can be combined against that fabric minimum. Different colourways, different shells or a printed box each carry their own minimum.
Repeat ordersA repeat against an approved sample and an existing fabric is quoted against a lower minimum than a first order. The repeat minimum is stated in the first quote, not held back.
Price breaksPriced at quantity break points across fabric, making, trims, packing and testing as separate lines, so two quotes can be compared on the same basis.

The four minimums, explained in full →

Samples and lead time

What you send, what comes back

Sampling is where a specification stops being a document. This is the sequence, and what each stage settles.

StageWhat happens
What to sendStyle or reference sample, target TOG and construction, size set, artwork, and the destination market.
What we send backA specification sheet with points of measure and tolerances, the four minimums, and a sampling plan with the stages named.
What the sample settlesFabric hand-feel, shell and lining combination, zip and guard, neck opening and armhole, and the fit at the smallest size.
Cost and timingSample cost, whether it is credited against a bulk order, and the time at each stage are stated in the quote. We do not publish a headline lead time, because it is set by fabric, print and the size of the run.
Sealed sampleBulk is made against a signed sealed sample. The seal defines the reference for colour, measurement and trims; a change after sealing is a new sample.

Lead time is quoted per stage — sampling, material, bulk, shipping — rather than as one figure that hides where the waiting is. The same applies to sample cost: it is stated with any credit against bulk.

Quality evidence

What a document covers, and what it does not

A test report is only useful if you know its boundary. The third column is the boundary, written the way we would explain it on a call.

DocumentCoversDoes not cover
In-house inspection recordMeasurement check against points of measure, visual defect check, and attachment pull test on zip and poppers, per batchOur own record, not a third-party report
Third-party test reportThe standards and clauses named in the report, for the style and batch that was submittedDoes not automatically cover other colourways, other sizes or a changed shell
Fibre composition statementThe composition of the batch as labelledA declaration, not a certification
Certificate (if held)Only the products and processes listed on that certificate, within its validity periodNever presented as covering the whole range
Safety documents by marketThe route that applies to the style and market, confirmed in writing before bulkIssued by the testing body, not by us; we do not self-declare a standard

How testing and inspection are run →

Questions buyers ask

What is a baby sleep sack?
A baby sleep sack is a sleeveless or long-sleeve wearable blanket that a baby sleeps in instead of a loose blanket. It is fastened at the shoulders or with a zip and worn over sleepwear. In the UK the same product is usually called a baby sleeping bag.
What is the difference between a sleep sack and a swaddle?
A swaddle restricts the arms against the body and is used with newborns; a sleep sack leaves the arms free and is used once a baby is ready to move. Paediatric guidance is to stop swaddling as soon as a baby shows signs of trying to roll, which is why the two products are specified and described separately.
Which TOG should I order?
TOG describes thermal resistance, not room temperature on its own. A 0.5 TOG sack suits a warm room, 2.5 TOG suits a cold one, and the guidance printed on the packaging should match the TOG of that specific style. We quote TOG per style against the actual construction, not as a range.
Should the sleep sack have a hood?
No, and this matters. The UK Office for Product Safety and Standards issued a safety alert in October 2026 concerning baby sleeping bags with a hood or without armholes, because of overheating and suffocation risk. Sleep sacks intended for unsupervised sleep in a cot should have armholes and no hood.
Can you do a two-way zip?
Yes. The zip guard at the neck, the puller type and the attachment security are specified separately, because a detachable puller is a small-parts hazard. We record the zip specification against the style so a repeat order matches.
Are your sleep sacks weighted?
No. We do not offer weighted sleep sacks or weighted swaddles. Weighted infant sleep products are opposed by paediatric bodies and are a liability in most markets rather than a selling point.
How is sizing decided?
By height and weight range, not by month alone. Two babies of the same age can differ by two size bands. We quote a size chart with points of measure and tolerances so you can compare it against your own fit standard.
Can I mix TOG values and prints in one order?
Yes, but each combination has its own fabric and print minimum. A three-TOG range in three prints is nine combinations, and we will tell you which of them are economic before you commit.
What is the minimum order for wholesale baby sleep sacks?
It is not one number. The binding constraint is whichever is largest: the fabric minimum, the print or dye lot, the style, or the packaging run. A private label sleep sack in a stock construction carries the lowest minimum; a new pattern or a new TOG build carries the highest. The method is set out in our guide to sleep sack MOQ, and we apply it to your brief rather than quoting a headline figure.
Do you supply both wholesale and private label sleep sacks?
Yes, and they are quoted differently. Wholesale baby sleep sacks are our constructions and fabrics with your order quantity; private label sleep sacks add your main label, care label, packaging and, where you want it, your print. If you are a distributor buying to resell rather than a brand building a range, say so at enquiry: the label and packaging scope usually changes what is economic.
Ordering with the sleep sack

What buyers usually add to the same order

Most programmes do not stop at one product. The swaddle covers the newborn stage before a sleep sack is used, and the blanket carries the same print into a gift set or a stroller accessory. Because the fabric and the artwork are shared, the second and third products usually carry the lowest unit cost in the container.

Each component keeps its own pattern, minimum and test scope. The shared part is the fabric, the artwork and the carton plan.

Sourcing sleep sacks for a season?

Send the construction, TOG, size set, quantity and destination. We will come back with a specification, a sampling plan and price breaks that match your volumes.