Request a quote
2 November 2026 · 6 min read

Choosing TOG ratings for a baby sleep sack collection

A quilted sleep sack body. TOG is a property of this finished build — shell fabric, fill and stitching together — not of the outer fabric alone.
A quilted sleep sack body. TOG is a property of this finished build — shell fabric, fill and stitching together — not of the outer fabric alone.
Short answer

TOG measures thermal resistance: the higher the number, the warmer the garment. It is a property of the finished product, not of the fibre, so two cotton sleep sacks can carry very different TOG values. A supplier should be able to state the TOG and the basis for it for each style.

What TOG is not

TOG is not a room-temperature instruction, and it is not a fibre property. A retailer may publish a table linking TOG to room temperature, which is a helpful heuristic for parents, but the number on the product is a measurement of that garment.

This is why “our cotton sleep sack is 2.5 TOG” is not a statement you can carry across a range. A muslin shell and a quilted shell can both be cotton and differ by two TOG steps.

The common ratings and what changes

TOGTypical seasonWhat changes in construction
0.5Summer, warm roomsSingle layer, often jersey or muslin, no wadding
1.0Spring and autumnDouble layer or light interlining
2.5Winter, unheated roomsPadded shell or multi-layer with loft
3.5Cold rooms onlyHeaviest build; overheating guidance becomes critical

In the UK, TOG is a familiar retail filter and shoppers search by it directly. In the US it is less familiar to consumers, which affects how much of the product page should be spent explaining it.

What a supplier should be able to tell you

“Tested” and “calculated” are not the same claim, and a buyer who publishes a calculated value as tested is exposed if the product is checked.

Planning the ladder for a collection

RatingWhat the build usually looks likeWhere it sits in a range
0.5 TOGSingle jersey or light muslin shell, no waddingSummer and warm-room SKU; lowest unit cost
1.0 TOGJersey shell with a light liningTransitional; often the volume SKU
2.5 TOGQuilted shell with waddingCore winter SKU and the most searched rating
3.5 TOGHeavier wadding, often with sleevesCold-room position; highest cost and narrowest size band

Most first ranges run two SKUs: 1.0 and 2.5. Add 0.5 only if the market has a genuine warm-room season, and treat 3.5 as a later addition — it is the most expensive to build and the easiest to get wrong on sizing because it is worn over the most clothing.

Verifying the rating on the finished product

Thermal resistance is measured on the finished garment, so the certificate, the report or the test has to refer to that build. Three questions make the difference between a rating and a claim: which method was used, which size was tested, and whether wadding or lining changed after the test.

If only the smallest size was tested, the larger sizes are not automatically covered — the surface area to volume ratio changes with size. We state the basis for the rating on the quote, including the size tested, so the number can be defended if a buyer asks.

The safety context buyers should know

In October 2026 the UK Office for Product Safety and Standards issued an alert on baby sleeping bags, citing overheating and suffocation risk where a bag has a hood or no armholes. Warmer ratings raise the stakes on this: a 3.5 TOG bag with a hood in a heated room is the scenario the guidance is trying to prevent.

The same alert states that dedicated swaddle products are outside its scope, which is a reason to keep swaddles and sleep sacks as separate product types with separate descriptions — not a reason to treat swaddles as unregulated.

Worked example: a two-SKU winter plan
SKUBuildSize setSold as
1.0 TOGJersey shell + light lining, no wadding0–6, 6–12, 12–18 monthsTransitional; the volume SKU
2.5 TOGQuilted shell + 120 gsm wadding0–6, 6–12, 12–18 monthsWinter core

Two builds, one pattern, one print. The 3.5 TOG is deliberately absent: it costs most to build, is worn over the most clothing, and is the easiest to get wrong on sizing. Illustrative values, not a stock product — they show the level of detail a spec sheet needs.

What we can put in front of you

Evidence for the points above, in the form a buyer can check rather than take on trust:

Where this goes next

From the question to a quote

  1. 1
    This guide — the decision behind the question, in the abstract.
  2. 2
    Baby sleep sacks — the construction, fabric and size specifications it applies to.
  3. 3
    All product lines — if the programme spans more than one line in the same shipment.
  4. 4
    Request a quote or a sample — send the fabric, the size set and the expected quantity.

Sources and standards

Links go to the issuing body’s own publication. Where a rule differs by market, the market is named in the text above; nothing here is a statement that a specific product is certified.

Frequently asked questions

Is higher TOG always better for winter?
No. Higher TOG means warmer, and overheating is a documented risk. The rating should match the room the product is sold for, and the packaging should say so.
Can TOG be claimed from the fabric alone?
No. It is a property of the finished garment. The shell, the layers and any wadding all contribute, which is why the claim has to be made per style.
Do US buyers search by TOG?
Less than UK buyers. TOG is a mainstream retail filter in the UK and a specialist term in the US, so the amount of explanation on a product page should differ by market.

Related

Next step

Send three things, get a real answer

Fabric or construction direction, the size set you are planning, and the quantity you expect for a first order. Approximate is fine — the point is to quote against your programme rather than against an average. If you already have a reference sample or a spec sheet, send that instead and we will work from it.

Discuss a series plan Read another guide