Request a quote
3 November 2026 · 8 min read

Baby textile supplier quality checklist

Inline inspection on the line our baby textile orders run through — the stage most of the checklist below attaches to.
Inline inspection on the line our baby textile orders run through — the stage most of the checklist below attaches to.
Short answer

Ask for six things before a deposit: a test report with its scope stated, a points-of-measure sheet with tolerances, wash and shrinkage data for the fabric quoted, colour fastness results, attachment and small-parts results, and a batch traceability method. A supplier who can produce all six is telling you more than any certificate wall.

Documents, and what each one actually proves

DocumentProvesDoes not prove
Test reportThat a specific sample passed specific tests at a specific lab on a specific dateThat your bulk order will pass, or that another style is covered
CertificateThat a management system or product scope is certified within a stated rangeAnything outside the scope printed on it
Points of measureWhat the garment is supposed to measure, and how much it may varyThat the bulk matches it without inspection
Wash dataHow that fabric behaved after a stated wash cycleHow a different colourway or print will behave
Inspection reportWhat a sample of the batch measured and looked like on a dateThat the rest of the batch is identical
Traceability recordWhich fabric lot, cut and line produced your orderThat the fabric itself is what the invoice claims

None of these is a substitute for another. That is the point of the list: each one covers a gap the others leave.

Anatomy of a test report

A report without these six fields is not usable as a purchasing document: the laboratory, the standard or method, the sample description, the test results with units, the date, and the scope — meaning which components and which colourways were actually tested.

The most common problem is not a failed test. It is a passed test on a sample that is not the product being ordered: a different fabric weight, a different colourway, a different trim. Ask which style, which colour and which batch the report refers to, and compare that answer with the purchase order.

Points of measure and tolerances

A size chart without tolerances implies zero variation, which no cut-and-sew line can achieve. What you want is a table of measurement points, the target value per size, and a permitted range — typically a small allowance on body length and a tighter one on features that affect function, such as foot length or armhole depth.

Tolerance is also where a cheap quote hides. A wider tolerance is cheaper to produce; if one supplier is materially cheaper on the same specification, ask what tolerance they are working to before assuming it is the same product.

Wash and colour fastness

Ask for dimensional change after a stated cycle, and separately for colour fastness to washing, to rubbing and to light where relevant. For a printed product, the print’s fastness is a separate result from the fabric’s, and it is the one that produces customer complaints.

The answer should name the cycle used. “Washed and tested” without a method is not a data point, because a 30°C gentle cycle and a 60°C household cycle are different products afterwards.

Attachments and small parts

Zip pullers, poppers, labels, appliqué and any decorative trim are checked as small parts. This is the area where a small cost decision creates a batch-level recall: a puller that detaches under a specified force is not a cosmetic defect.

Ask for the attachment test result on the actual puller and the actual fixing method, not on the zip brand’s general literature.

Traceability

Traceability means being able to answer, six months later, which fabric lot went into which carton. It is what makes a complaint investigable and a recall containable. Ask how the batch is marked, where the record lives, and how long it is kept.

A supplier who cannot describe the method in two sentences does not have one.

The checklist, in the order to ask

Six questions, none of them adversarial. A supplier who answers them plainly is easier to work with than one who answers them with a brochure.

Worked example: what a usable report header contains
FieldWhat good looks likeWhat to reject
LaboratoryNamed lab, with an accreditation number“Tested by our QC team”
MethodStandard number and year“Passed our internal standard”
SampleStyle, colourway, fabric weight, batch“Similar style”
ResultValue with units, per specimen“Compliant” with no data
DateTest date, not invoice dateUndated page
ScopeComponents and colourways coveredSilence on scope

A report missing any of these six is a brochure. This table is the fastest way to tell the difference.

What we can put in front of you

Evidence for the points above, in the form a buyer can check rather than take on trust:

Where this goes next

From the question to a quote

  1. 1
    This guide — the decision behind the question, in the abstract.
  2. 2
    Quality & testing — the construction, fabric and size specifications it applies to.
  3. 3
    All product lines — if the programme spans more than one line in the same shipment.
  4. 4
    Request a quote or a sample — send the fabric, the size set and the expected quantity.

Sources and standards

Links go to the issuing body’s own publication. Where a rule differs by market, the market is named in the text above; nothing here is a statement that a specific product is certified.

Frequently asked questions

Is AQL 2.5 a quality level?
It is an acceptance sampling plan, not a statement about the product. It defines how many defects are tolerated in a sample of a given size, and it only means something when the defect classifications are written down.
Can a test report be reused for another style?
Only for the components and constructions it actually covers. A report on one fabric weight does not cover a different weight, and a report on one colourway does not automatically cover a print.
What is a sealed sample?
A production-representative sample, signed by both sides and kept by both. Bulk is judged against it. Without one, “as per sample” means whatever each side remembers.
Do you publish certificates on the site?
No. We state which document covers which style and market, and provide the document with the quote or before bulk. A logo on a website is not evidence of scope.

Related

Next step

Send three things, get a real answer

Fabric or construction direction, the size set you are planning, and the quantity you expect for a first order. Approximate is fine — the point is to quote against your programme rather than against an average. If you already have a reference sample or a spec sheet, send that instead and we will work from it.

Ask for the specification pack Read another guide